The design characteristics of the chassis processing of the network rack cabinet:

1. The front and rear panels of the chassis can be designed to be detachable;

2. The heat dissipation method of the chassis can be determined according to customer requirements;

3. The fixed angle of the box body can be made into a component-mounted or integral type, and has U-holes to facilitate its connection and use;

5. Surface treatment: spraying, phosphating, oxidation;

6. Press-fit rivets can be press-fitted before or after coating;

7. The special welding will not damage the coating of the fingerprint-resistant galvanized sheet, making the inside of the box more beautiful and more corrosive. Flexible configuration: The circuit board can be flexibly selected in the guide groove according to the demand, and it is convenient to plug and unplug. The structure is compact, with two upper and lower layers, which can meet different needs.

8. Good ventilation and heat dissipation: Ventilation and heat dissipation holes are opened on the top and both sides of the U-shaped board and a fan assembly is installed on the upper part so that the built-in equipment in the plug-in box can run at a reasonable temperature.

9. The cabinet of the network machine also needs to be treated with the electrostatic spray, which can effectively strengthen the corrosion resistance of the outside.

For details, please contact: home network cabinet.